People riding aggressively on rocky terrain wish to reduce their inflating pressure for better traction and control, and at the same time they need to avoid “hitting hard”, pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That’s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These devices fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With TyreInvader Effetto want to offer an excellent yet simple solution, keeping weight and cost low.
No influence on normal riding
TyreInvader is flat and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). It’s still better to test ride TyreInvader before racing it.
Effetto don’t suggest to use lighter tyres nor to go incredibly low with inflating pressure; just set you tyres up the way you like them, and don’t worry about pinch flats.
Lightweight
The weights for the different TyreInvaders refer to the product uncut (for 29” wheels), so it’s even lower when adapted to 27.5” or 26” wheels.
- TyreInvader 35 = 48 g
- TyreInvader 40 = 53 g
- TyreInvader 50 = 68 g
- TyreInvader 55 = 80 g
- TyreInvader 60 = 92 g
Tolerance on nominal weight is + / – 5%
Premium material
TyreInvader is made of high density EVA, a very durable/strong/light foam employed by the sport shoe industry; this material can resist heavy impacts with very little damage. Effetto recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.
Sealant-optimised
EVA has a closed-cell structure that cannot absorb any sealant. Additionally, the cut-outs of TyreInvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.
As inserts have surfaces that are wetted by the sealant, a fraction of it won’t be available to move around to do its job. For this reason, also with TyreInvader Effetto recommend to slightly increase the quantity of sealant normally employed, by 30 ml.
TyreInvader has been designed to function with a Caffélatex sealant, ammonia free.
Easy to assemble and mount
Just cut TyreInvader following the instructions (for 27.5” and 26”; no need to cut for 29”), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little bit to fit the diameter), add sealant, go ride.
Real run flat behaviour
TyreInvader has been sized to sit tightly on the rim, so that in case of emergency, it will push the tyre against the rim, allowing the rider to finish the run or ride until it’s safe to stop. This should be considered an exceptional functioning mode, as Effetto don’t recommend you ride with TyreInvader at zero pressure.
Compatible with any tubeless valve
The shape of TyreInvader prevents it for sitting over the valve base, on most rims. To make sure it doesn’t happen on any rim, TyreInvader has an open slot, to be positioned over the valve.
Functional packaging
TyreInvader is sold in pairs (so 2 pcs per pack, including 4 zip-ties), inside a transparent bag. That bag can be folded and carried inside your backpack, in case you want to remove your TyreInvader and store it, without worrying about sealant stains. Or you can simply use the bag for shopping and /or carrying stuff.
What about the little aliens and the arcade font?
Who doesn’t remember SpaceInvaders? If you don’t, it means you’re too young, but you can still enjoy some of that thanks to retrogaming. Besides, this product is actually invading the tyre, thus “TyreInvader”.
The cut-outs serve several purposes: to save weight, to allow easy sealant flow and to offer some cool branding/styling opportunities. #tyreinvader #nevergameover
TyreInvader is Made in Italy